Before you begin, you may wish to read the FAQ section:
WARNING: Ensure that surgical gloves and protective eyewear are worn whenever
cleaning or maintaining any part of the suction system.
Step 1:
Fill the Pulse Cleaner with 2.5 litres of warm water (NB: each marking point on the inside of the Pulse Cleaner marks 1 litre, so you should fill it to half way between the 2nd and 3rd lines).
IMPORTANT - always fill the Pulse Cleaner with water first, DO NOT put in the Pulijet PLUS first as this will create strong odours.
Step 2:
Place the Pulijet PLUS bottle on a flat and steady surface and remove the lid.
Step 3:
Squeeze the bottle of Pulijet PLUS until the fluid reaches the top of the cap.
Step 4:
Remove pressure from the bottle. The Pulijet PLUS should fall to the marking on the clear lid.
Step 5:
Pour the Pulijet PLUS fluid contained in the top into the Pulse Cleaner.
Step 6:
Connect the large and small suction tubes to the Pulse Cleaner and wait until the solution has been evacuated (there will be a small quantity that remains in the Pulse Cleaner).
Step 7:
Pour the remaining fluid in the Pulse Cleaner into the spittoon.